Loaner pump Recommendations

[Jonnydread]

A $0.01 piece of tape, preferably three narrow ones evenly spaced, is all you need to stop rollouts. A single roll of electrical tap will stop rollouts in HUNDREDS of Trracers. You don’t need a sizer. People just buy that stuff…because they want to, apparently. It’s not even better at the job. Tape absolutely works better that freaks and sizers on modern paint. I guess they like spending money on stuff. It’s never been explained to me. If anyone has any info on that please reply via PM or Quote rather than comment. I’d love to understand you more.

Tape is perfectly functional for stopping rollouts, full stop.

I have no great love for inserts, but with dinky paint epidemic I have found they are a significant help with boosting FPS. I have a few markers that will not reach field velocity without an underbore.

[Jsc5150]

It’s pretty much impossible to beat the Trracer in this area. We’re talking like 1/3 to 1/4 the price of a freaked sniper thats probably got no auto trigger. There’s no comparison value-wise.

Totally stock non-effed up Trracers are best. The pump stroke is better than Phantom. The gun never needs parts. It was a deal 35 years ago and still is. They are all right feed and the feed doubles as a cram and jam. If nobody screwed with the springs they run CO2 flawlessly.

A $0.01 piece of tape, preferably three narrow ones evenly spaced, is all you need to stop rollouts. A single roll of electrical tap will stop rollouts in HUNDREDS of Trracers. You don’t need a sizer. People just buy that stuff…because they want to, apparently. It’s not even better at the job. Tape absolutely works better that freaks and sizers on modern paint. I guess they like spending money on stuff. It’s never been explained to me. If anyone has any info on that please reply via PM or Quote rather than comment. I’d love to understand you more.

Tape can work, I always keep a roll in the toolbox.

But I still use spacers and freaks instead of tape, because they are more convenient and quicker to get working at the field for me. They don’t leave gunk on the barrel, can be threaded on and off the gun without any particular care, and they don’t induce a biased spin like quick tape jobs.

All my spacers and freaks pay for themselves by sparing me the time and careful handling I need to use to make tape work. I guess you could call it a luxury.

Idk about tape being better with modern paint. My experience with tape is 5-10 minutes of cutting, taping and testing then it works. My experience with spacers/freaks is about 30 seconds of finding the size that holds the ball, then it works.

[SignOfZeta]

Tape can work, I always keep a roll in the toolbox.

But I still use spacers and freaks instead of tape, because they are more convenient and quicker to get working at the field for me. They don’t leave gunk on the barrel, can be threaded on and off the gun without any particular care, and they don’t induce a biased spin like quick tape jobs.

All my spacers and freaks pay for themselves by sparing me the time and careful handling I need to use to make tape work. I guess you could call it a luxury.

Idk about tape being better with modern paint. My experience with tape is 5-10 minutes of cutting, taping and testing then it works. My experience with spacers/freaks is about 30 seconds of finding the size that holds the ball, then it works.

A good tape job last a long time though. It takes less time by only needing to be done once a year. I don’t even take the barrel off of most of my guns until it needs to be removed for some other reason.

Are you…re-applying the tape every time you go out? That shouldn’t be necessary. It should last for thousands of shots.

My experience with sizers and freaks is that field paint rolls out anyway because unless it’s *super* tight…a round bore cannot consistently grip paint that isn’t also round. I play BYOP only once a year so gains that only can be realized on that weekend are overall very small gains.

[SignOfZeta]

Tape is perfectly functional for stopping rollouts, full stop.

I have no great love for inserts, but with dinky paint epidemic I have found they are a significant help with boosting FPS. I have a few markers that will not reach field velocity without an underbore.

Thats makes perfect sense.

[drewkroeker]

Lots of good insight in this thread. Wilfortina I've been thinking about doing something similar, stack up a fleet of pumps to kit out my friends who don't have gear.

[Myrkul]

If you want something a little fancier then the PMI Trracer, the empire Trracer is also insanely good. You can find them with either Spring feeds or with the clamping feedneck adapter, and they have an anti double feed detent and take autococker threaded barrels. Crazy good guns that are frequently overlooked.

[BrickHaus]

Yeah, your tracer is pretty nice.