4500psi AGD Flatline Regulator

[superman]

DocsMachine I may have found these. If i need to send these up i can.

[DocsMachine]

Both new? I'd love to check them out. I'm pretty sure these punched ones will work, but if I can examine an original, so much the better.

Doc.

[superman]

pm me your address and i will get them in the mail the next time i make it to the post office. (Should be this week.)

[Levi]

Color me interested in a full rebuild kit. I picked up a Flatline direct from AGD in either 2013 or 2014. Which must have been way old stock at that point. If you get these figured out maybe you could take a crack at the Dynaflow reg seats?

[DocsMachine]

Easily. I've got a Dyna and a Hyper rolling around here somewhere... Lemme get this Flatline off the table and I'll take a look.

Doc.

[Dusty Bottoms]

Oooh, rebuilt Dynaflow regs would be really cool!

[DocsMachine]

New thread started for the Dyna/Hyperflows, and other obscure seals in general.

Doc.

[superman]

Of course i start dissassembling the one i had on hand and the reg piston is bent. The other parts to the left are apparently 3k reg pistons i had kicking around. Circling up with a local that has 4500 flatline reg that was working and is also in need of a reg seat. I will be commandeering his reg for testing.

Reason number 507 to make sure you know what you are doing when installing the reg seats.

[Spider!]

Can you make a new pin and thread it into the piston with some sealer? Idk how thick the piston face is.

[superman]

I suspect AGD may have one kicking around.

[superman]

got my 2 reg seats from Doc this weekend. Picked up a friends flatline. hoping to have some time to swap the reg seats tonight.