I saw this for sale on eBay and just kinda looked past it for nearly a week. Then I just happened to take a closer look. So I picked up the whole lot for $5 plus shipping. Might not have the early green body, but I will have some of the green plugs at least. Might just try them on the Cabelas Raptor to see how they look.
-
-
I just got one with a bundle deal for less than $80.
has anyone thought about turning one into a pump? It would work perfect being slot on both sides to add a pump arm. Also mill down the feed need and add a10R tube!?!?!
Do you guys know of any trigger frames or internals that can be swapped?
#51680
Okay okay..l Just follow with me for a bit..
]
Attached FilesLast edited by pdang; 01-19-2023, 10:39 PM.Comment
-
-
pdang the raptor looks great as a pump. You should do any of these mock ups. Most STBB markers make great pumps. Azodin proved it for sure. I personaly like the look of the pump arm wrapped around the barrel myself. Reminds me of my sterling pump which I love and also has a silver ano.
.
RESPECT ME AND MY PINK RIMS!!!Comment
-
Just an FYI, If you are looking for a replacement Raptor main spring, I just figured out that a Tiberius T15 main spring is the same diameter while being slightly longer and stiffer than the stock Raptor main spring.
After a very brief test in 40 degree temps with an HPA tank putting out about 750psi, I took out the spacer and backed out the velocity adjuster so it was flush with the rear plug and was shooting between 300-310 fps.Comment
-
Has anyone swapped the Raptor valve out with a modified Autococker valve?Comment
-
No, never heard of that before.Comment
-
has anyone cut the angled feed tube and convert one of these to a vertical feed? or feed it with a tube?Comment
-
I own a vert feed Raptor - it is a one-of-a-kind prototype from BE. There have been tube conversions. Frankly, I'd rather have a side feed, like a cocker.Comment
Comment