The Official CCI Picture Thread
Collapse
This is a sticky topic.
X
X
-
The cram 'n' jam in the second picture is neat. Is that EVI? I haven't seen that style. -
JeepDVLZ45 and XEMON hit it the nail on the head. I got my dummy 12 gram through RTR. I put an o-ring in the puncture pin assembly to stop the adapter from rotating when I threaded the elbow in. I had to put a new puncture seal in after I finished putting the elbow on because the old puncture seal was ruined in the process.
As XEMON mentioned, putting a straight fitting on will allow you to change from the adapter to just running 12 grams without needing to unscrew your fittings. Luckily, I have an extra 12 gram bucket, so if I want to switch back and forth, I just use the current bucket with the adapter, or my other bucket if I want to run the 12 grams.Last edited by glasscitymitch_02; 02-24-2022, 08:24 PM. -
JeepDVLZ45 XEMON Thanks for all the information fellas! I’m in the process of getting things dialed in configured just the way I want it for Slim’s Spring Stock-Class Celebration. Hope to see you guys there! -
I put a straight disconnect to the one I made.
Put a QD with a 90 on that and you can switch from asa to vasa without any tools ... -
Phantom87
You can just use a standard bucket changer and pick up a dummy 12g from RTR, a couple 90* fittings and some macro line.
https://remembertheronin.com/product...ool-end-mount/
Only thing that’s a PITA is getting the fitting screwed in since the dummy 12 wants to rotate in the bucket changer -
Nice setup! Would you mind helping me source that air through 12g please, thanks in advance! -
Finished up my open class Phantom. Feels right, looking forward to taking it out for some rec ball action soonLeave a comment:
-
I picked up a Redz Grenade ASA. Thought it was silly and fun, and I figured I wouldn't need the on/off feature.
And yes, the phantom dual rod one is what I'd pick up. Thanks

Leave a comment: