JC's Brass thread

[JeeperCreeper]

Yes a single shot, the barrel slides forward to open the breech and pop in a paintball. There's no sliding bolt anymore. I gained 2" of barrel by doing this.

[Cal440]

Looking forward to a shooting video, I am sure all my questions will answer themselves. Is it going to be a single shot?

[redsquirrel]

Sheeeesh that looks so cool! Cant wait to see a shooting vid

[JeeperCreeper]

Today has brought some progress. Detent added, I slotted the lower tube for the cocking knob I'll be adding, I also finished up the barrel tube. I just need to tap the valve, run the tiny airline, and drill and tap that hammer. Then it needs a good clean up and a plate job.

[JeeperCreeper]

Making this one just a little different. It will make more sense soon.

https://youtube.com/shorts/QufRmxvxD...V0krRVfttL9h0o

[JeeperCreeper]

#16

[Ecapnation]

What serial number is the BBT?

[JeeperCreeper]

I'll also be treating her to fresh nickel plating soon.

[Jordan]

Not just a Palmers, that's a BBT Typhoon. Very cool, glad it's getting fixed up.

[JeeperCreeper]

Re soldered a barrel retainer nut on this Palmers, and this PGP came back for a refinish and another detent to prevent double feeds.

[binson]

This looks hot!

[JeeperCreeper]

PGP with Speed Demon conversion, Freak barrel, and a neat brass dohicky for the bolt. Nearly done.

[JeeperCreeper]

In the bin, another single shot PGP. In the box, hopfully mad science.

[cougar20th]

Looks great. Don't forget if possible to save and add the old site bead.

[cougar20th]

Cal440

The gun is a flatback Kp3 that has been to palmers a couple times for mods.

This is the gun before. Unfortunately the large barrel and small paint had made it useless. It's sort of a unique piece that will be more unique after JeeperCreeper is done.

img_1_1739050557197.webp