First Strike Roscoe Revisited?

[Toestr]

Any updates on this?

[Trbo323]

Honestly I haven't had time to mess with it more

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Toestr]

I spoke with someone yesterday who suggested that many of the problems with paint breakage are related to the barrel not indexing with the cylinder properly.

[ElectricBullshark]

I just got mine and used it yesterday. It is a complete blender on paint. Ugh!!

The umarex pump shotgun i used works just fine on the same paint.

[COB]

My experience has been that the inner diameter of the barrel is less than .50 inch. Most of the 50 cal paint I have, simply does not fit in the barrel.

[ElectricBullshark]

I have the .68 cal version

[Trbo323]

I have the .68 cal version

I very much doubt that because there is no . 68 Roscoe

You probably have the TR68. Different marker

Sent from my motorola edge 2024 using Tapatalk

[ElectricBullshark]

Ooh i thought people just called the revolvers roscoe lmao. Yea its the tr68. Same problem though lol

[ChoSanJuan]

OK, I just got one of these from nobbie333 at Caveball. It is, indeed, a paint blender. Trying to source the bougie priced 50cal FS rounds, but every place that I have looked/have them listed, they are sold out. (with the exception of USP and "home defense" rounds... not interested in those.) Mine has the high impact valve but for what I could see on the crono, it's still shooting real low. I changed my spring to something lighter and fit that was sitting in my big bag o springs. It seems to be flowing more air as the cupseal cracks, but that could be placebo. I've also noticed that the barrel indexing problem could be due to an incredibly tight fit with the barrel, so the front barrel spring isn't pushing it all the way back.

My tentative fix: 3d printing a spacer that just keeps the barrel pushed all the way back without any chance of it sliding forward.

I'll post more when it's done printing and I can do some testing.