Apparently there's not many of these so if they do ever pop up they go for a ton. Had never heard of them before. From "Seed Paintball", also a name I've never heard, and it included a new board that allows the loader to spin backwards if it detects a jam plus two different motors. Obviously these didn't do so well or we would see more but I thought it was interesting
-
I recall these ..I wish I had snagged one back then. -
The Seed kit really didn’t improve performance other then higher rates of fire. Lots of guys were able to get better results in that category but using X mod engines that could be purchased out of China for like $6. The Seed kit cost more then what you pay for a rotor now. They did add ball barings to the lower gear cup but it didn’t really make all that much of a difference. 90% snake oil.
Comment
-
Dye had a video of a dm7 actually shooting 40bps with a stock rotor...... Who felt that wasn't enough?Originally posted by Chuck E Ducky View Post
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
Ah! Now I know what that seed sticker isComment
-
14 years ago paint fit the dye rotor perfectly. Seems like this was solution to a problem that didn’t exist. Also the rotor would jam in the actual feedneck if it were to catastrophically jam which was beyond the drives ability to unjam by merely reversingComment
-
I used an LTR for a long time with zero problems no matter how bad the paint. Just turned the tension down is allComment
-
I also don't have any issues with OG Rotors of varying ages using modern small ball paintComment
-
Freeflow recently released their Rotor "upgrade" guys, which I saw the Seed kit mentioned in discussions about it. And regarding the FF upgrade, several people have already been switched back to the stock parts lolComment
-
Only upgrade for the rotor is good lithium ion batteries and the exalt/knock offs exalt speed feeds that sandwich between the lid covers. The LTR addressed the window breakage issue.Comment
-
There was an issue with this? I still have an og gen 1 rotor that at one point took a 6 foot fall onto concrete breaking 5 or so balls inside and nothing happened to the windows. Well nothing happened to the whole hopper. It was still trying to feed soupOriginally posted by Chuck E Ducky View Post
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
Most of the windows on my Rotors are chipped/cracking at this point, but paintballs can't fall out, so I'm not worried.
But I am fancy and have the hard plastic Virtue(?) speed feeds on mine.Comment
-
I still really want to know who felt the claimed 50+BPS and proven 40bps was not enough and needed upgrading.
Like what the hell were they shooting? Might as well be a paint light saber at that point
Let's say you can get it to 60 BPS. That's a pod every 2.5 seconds. Can you even dump the paint in that fast?
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
huh. didn't know seed rotors were worth something. I have one lol.
I should see if I can get it ripping up at silly high BPS for giggles sometimeComment
-
Since the rotor can feed 40bps in its stock configuration, I wonder if undervolting it or swapping for a motor with half or 1/3rd of the speed would make it sync better to modern rampingIf it doesn't have the [F] i don't want it. - EuropoorComment
Comment