Welcome to MCB! We are the most popular and active paintball forum found on the internet! Thank you for stopping by.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The new site changes also meant cookie changes. Sorry. Unavoidable. If you're getting logged out, you need to clear your browser cache / data and cookies. Then when you log back in, you will be all set. More HERE on what's happening next.
I thought about this as well, the real problem is the trigger and safety/mode switch. Since it's the dumb hall effects thing, you have to make sure it's lined up perfect or it won't work.
Sent from my Moto Z (2) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Board needs to be defaulted. Previous owner left the battery in, until it went dead. This can cause major drop off in Minis/Axes as a persisting problem, no matter how fresh your new battery is.Incredibly hard to troubleshoot, if you don't know about it beforehand.
After my rebuild, the most notable issue was the bolt and how disgusting it was. Thinking all the sludge on it would definitely hamper proper functioning.
Only an early indication as I haven't turned it on or aired it up yet. Will bring a battery home from work tonight and hopefully have enough air to cycle.
Threw in a new battery, after a little fiddling it turned on so I popped on the Rip Clip and used what little air ai had left to shoot about 10 rounds in the dark. So it’s now in full working condition.
Win is a tie between Jordan and Fubarius. Too much grease on the bolt or some strange mix of oil and grease and battery was funky when I first tried it but after a few tried it turned on just fine.
You both win a virtual high-five and the admiration of your peers!
Oh, and I bought it for $30 CAD. The guy was asking 50 then talked himself down to $30
He had also met me at a public park and just came strolling g down the street holding the gun without a bag or anything. Said it was okay as he took the mag out....
Just to be different. . Im willing to bet the bolt spring was in backwards.
Cuda, if you know anything about axes, minis, or tms, the bolt return spring 8s slightly tapered. The narrow end goes on the bolt and " clicks" onto the bolt.
If you put it on backwards it binds when you fire.
Ive gotten a few non working cheap axes or tms that way.
I did notice that when I put it back together. One way the spring wouldn’t fit over the bolt, the other way it would.
I don’t think this guy was the type to take anything apart, so it was likely never cleaned properly. I know the outside has some old paint that was never cleaned off.
Locally I'll probably get in the 200-250 range. They pop up decently often and are usually in the $300 plus range. I got a great deal, so can pass that on to the new owner. I've got a small horde I need to list locally including an X7 with grip, a Spyder Electra with rocking trigger and a good old Spyder Shutter to allows me to cover a pretty large price range and the best part is I've already recovered what I paid for all these so whatever they do go for is all gravy.
Comment