[MOTM] April: Custom Works

[Chuck E Ducky]

It is pretty custom isn’t it. image.gif

[JeepDVLZ45]

🤣😂. I even recognize that kitchen 🤣

[Chuck E Ducky]

I guess I got to take a picture of my own.

[Arthur]

Chromed out

[Chuck E Ducky]

That thing is super cool!

[scottieb]

I do wish chrome would make a comeback.

[scottieb]

Here's mine for this month - a custom Hammer II. The over barrel grip is used to activate the 3way, the ram is under grip. The pump stroke is quite short . Rethreaded SP AA barrel.

16AD0C42-8822-47FC-A90E-AB0BE217BD16.jpg

[Cal440]

Very cool 😎! Did you build this?

[scottieb]

No. I picked it up secondhand, or thirdhand, or fourth... It's a great little piece. I'm trying to work out a way to get the 3way in the grip frame and activate it with the trigger. The point being to make it semi auto.

[alpha_q_up]

I suppose I'll join if this qualifies, I have my latest finished pump mag I build. I machined the body to be in line with the rail, I slot milled the rail, machined the hybrid Asa rail to be shorter and match the dye single trigger, I modified a double trigger to fit the dye single trigger frame so I could have it ano matched, and biggest modification/custom part, the pump kit, I modified an AC Parts slice handle and machined a pump kit to mount it on. The rest of it were just spare parts I had 🤭

[Cal440]

Great looking ano, and the whole package. Who is responsible for that finish? WowExcellent!

[alpha_q_up]

ATMF(AnoTech Metal Finishing) out of Clovis, CA. I sent them the parts with the instructions "you do you, just make sure there's some silver in there" and this is what they brought back to me.

[JeeperCreeper]

Wow, me likey.

[markdem]

The stupidest and most fun gun i ever made. For the Junk Class event that was held at Warzone last year. Bicycle pump, soda bottle, pvc and wood.

[ChuckLove]

What perfect timing for this month! I just finished my first fully custom build. By that I mean the first gun that I've hand picked every part and had it all anodized to match.

Mozak Machine "Slender Cut" Half Block Sniper

Build Sheet:
• Polished Green by Ruckus Anodizing
• CCM 45 Frame
• ACP V3 Slice Pump Kit & Ultralite Sleeved Barrel
• AKA Sidewinder Regulator
• Lazarus Valve
• Jenni Kraig Delrin Hammer
• Inception Trident Bolt, FLE Feedneck, EZ On/Off & Rail
• Shocktech Detent
• Hogue Grips

[JeeperCreeper]

Almost everything I have is a custom build, so I'll put this one in the spotlight today.

Creeper Custom BS-VCS (Brass Sterling, Vertical Stock Class)

-Freak barrel with CF tip. (I also have a brass pointy tip)
- removable 12 round feed
- CCI bucket changer
- detent to hold a ball in the chamber
- modded PGP grip frame (for now)

[ChuckLove]

That's awesome!

[JeeperCreeper]

Same to you, sir. I just saw the shooting video, that thing is smooth!

[ChuckLove]

JeeperCreeper It took a bit of tinkering with both pump return and hammer springs and then some bolt O-rings. The pump stroke is comparable to my CCM MBP so I'm happy with it.

[Jordan]

Lots of pumps this month, I see. (And I saw the Em, don't worry - very cool.)

Better mix it up a bit with Riot's next marker...

Magfed, mech converted Ion in a bespoke brass exoskeleton I built this winter... SMAV3 mounted inside an Automag frame that I further modified to be gas-through using an LP converted Stab. It uses a DAM magwell and is also FS ready.

20250125_163133.jpg

[William the Third]

I will naked Greco Roman wrestle Riot for this!

[Jordan]

https://i.imgur.com/PqLQjVi.gif

[Alexndl]

Custom autococker
started with a Bob Long body and frame that where badly cut with an hacksaw. All the parts are now ready for ano or Cerakote (most likely stormtrooper white body with black parts)
20250404_194016.jpg

[Cal440]

That color combo will look 👍

[Kit]

My balance valve on twelve gram experiment
Stockclass feed
asa threaded the front of the body
11/16 bored running dye Lazarus valve
Delrin hammer with SLP hammer spring
Palmers stab as a reg and guide rod

20250404_160206.jpg

[Psycho91]

This is clever

[latches109]

Trilogy,

• feedneck mod,
• half-block, used the original back block to make a new back block, with ACP slot blocker
• Machined off ram
• inception bolt,
• modified lazerous valve,
• pump return spring for the hammer,
• CCM Quad Rod pump kit with Mini pump handle
• mozak frame, AKA sidewinder short, bob long cam drive asa, freak barrel, Doc's detention.
• anodizing by Fab
• pressure is at 135PSI shooting 295FPS - where are all my silly long volumizers at?

IMG_9941.jpg

[Psycho91]

What did you do to modify the laz valve

[Moodog]

Also curious to know how you modified the valve.

[chplnstone]

I'll throw in some brass... my old k2. it's my second brassgun, and first k-series, came to me heavily chopped/df cut/constant air/pumped. I learned a lot of what I know slowly repairing the d/f cut, replacing the ammo tube, flat top rolling, making the handle, etc.

[Super Nova]

Just a little chop and drop

[Frmrspec]

Alright.. let’s go ahead and open up nominations

[BigRed]

Ok, I’ll nominate Jordan with his mag fed Ion.