[MOTM] April: Custom Works

[Chuck E Ducky]

It is pretty custom isn’t it.

[JeepDVLZ45]

🤣😂. I even recognize that kitchen 🤣

[Chuck E Ducky]

I guess I got to take a picture of my own.

[Arthur]

Chromed out

[Chuck E Ducky]

That thing is super cool!

[scottieb]

I do wish chrome would make a comeback.

[scottieb]

Here's mine for this month - a custom Hammer II. The over barrel grip is used to activate the 3way, the ram is under grip. The pump stroke is quite short . Rethreaded SP AA barrel.

[Cal440]

Very cool 😎! Did you build this?

[scottieb]

No. I picked it up secondhand, or thirdhand, or fourth... It's a great little piece. I'm trying to work out a way to get the 3way in the grip frame and activate it with the trigger. The point being to make it semi auto.

[alpha_q_up]

I suppose I'll join if this qualifies, I have my latest finished pump mag I build. I machined the body to be in line with the rail, I slot milled the rail, machined the hybrid Asa rail to be shorter and match the dye single trigger, I modified a double trigger to fit the dye single trigger frame so I could have it ano matched, and biggest modification/custom part, the pump kit, I modified an AC Parts slice handle and machined a pump kit to mount it on. The rest of it were just spare parts I had 🤭

[Cal440]

Great looking ano, and the whole package. Who is responsible for that finish? WowExcellent!

[alpha_q_up]

ATMF(AnoTech Metal Finishing) out of Clovis, CA. I sent them the parts with the instructions "you do you, just make sure there's some silver in there" and this is what they brought back to me.

[JeeperCreeper]

Wow, me likey.

[markdem]

The stupidest and most fun gun i ever made. For the Junk Class event that was held at Warzone last year. Bicycle pump, soda bottle, pvc and wood.

[ChuckLove]

What perfect timing for this month! I just finished my first fully custom build. By that I mean the first gun that I've hand picked every part and had it all anodized to match.

Mozak Machine "Slender Cut" Half Block Sniper

Build Sheet:
• Polished Green by Ruckus Anodizing
• CCM 45 Frame
• ACP V3 Slice Pump Kit & Ultralite Sleeved Barrel
• AKA Sidewinder Regulator
• Lazarus Valve
• Jenni Kraig Delrin Hammer
• Inception Trident Bolt, FLE Feedneck, EZ On/Off & Rail
• Shocktech Detent
• Hogue Grips

[JeeperCreeper]

Almost everything I have is a custom build, so I'll put this one in the spotlight today.

Creeper Custom BS-VCS (Brass Sterling, Vertical Stock Class)

-Freak barrel with CF tip. (I also have a brass pointy tip)
- removable 12 round feed
- CCI bucket changer
- detent to hold a ball in the chamber
- modded PGP grip frame (for now)

[ChuckLove]

That's awesome!

[JeeperCreeper]

Same to you, sir. I just saw the shooting video, that thing is smooth!

[ChuckLove]

JeeperCreeper It took a bit of tinkering with both pump return and hammer springs and then some bolt O-rings. The pump stroke is comparable to my CCM MBP so I'm happy with it.

[Jordan]

Lots of pumps this month, I see.

Better mix it up a bit with Riot's next marker....

Magfed, mech converted Ion in a bespoke brass exoskeleton I built this winter... SMAV3 mounted inside an Automag frame that I also modified to be gas-through using an LP converted Stab. It uses a DAM magwell and is also FS ready.