Building/tuning a STBB

[Psycho91]

If I changed a valve or 2 out which would y'all recommend the balance valve from the vs line or the eko valve

[Trbo323]

It's the stock valve out of later Spyders. The valve pin is designed in such a way to allow more flow and blowback is provided via a small hole in the valve rather than the valve pin. My hope is to increase volume/flow so therefore I can use lighter springs/striker.

It's the stock valve out of later Spyders. The valve pin is designed in such a way to allow more flow and blowback is provided via a small hole in the valve rather than the valve pin. My hope is to increase volume/flow so therefore I can use lighter springs/striker.

Which later spyders? I've taken apart pretty much everything there is outside of the balance valve and spyders have always had the cut out of the valve stem not a hole in the valve itself

There's a lot of stuff like JT and off brand that run the valve hole but I've never seen it on a spyder

Sent from my motorola edge 2024 using Tapatalk

[RhoXi]

Which later spyders? I've taken apart pretty much everything there is outside of the balance valve and spyders have always had the cut out of the valve stem not a hole in the valve itself

There's a lot of stuff like JT and off brand that run the valve hole but I've never seen it on a spyder

Sent from my motorola edge 2024 using Tapatalk

From a quick glance, it looks like it came on the fenix, MRX, MR100, MR5, etc. Here's the ANS page for the vavle body.

https://ansgear.com/kingman-spyder-fenix-eko-valve-body-itp025/

I read some threads on LP spyders where people got some good results with these above 400 or so psi. We'll see if I wasted my money or not.

[Trbo323]

From a quick glance, it looks like it came on the fenix, MRX, MR100, MR5, etc. Here's the ANS page for the vavle body.

https://ansgear.com/kingman-spyder-fenix-eko-valve-body-itp025/

I read some threads on LP spyders where people got some good results with these above 400 or so psi. We'll see if I wasted my money or not.

Weird, wonder when that changed because I've had most of those you listed cross my work bench

Sent from my motorola edge 2024 using Tapatalk