I am trying to buy a Vet Twin from Doc's Machine. Does anyone have any experience with these?
Announcement
Collapse
No announcement yet.
Vee Twin Autococker
Collapse
X
-
How many kidneys do you have?Love my brass ... Love my SSR ... Hard choices ...
XEMON's phantom double sided feed
Keep your ATS going: Project rATS 2.0
My Feedback
-
Okay, here's the story, and every time somebody asks, this is what I tell them:
I currently have three partially-finished bodies, probably 60-70% done. It would not take long to complete one, but there would also be necessary time to make the front and back blocks, bolts, valve and pump rod.
Your options are wide open. I can supply anything from a basic body kit, to a fully completed marker, in nearly any configuration you'd like, assuming either you have or I can find, the parts. The basic body kit, everything you would need to finish the rest of the gun using factory parts, will run close to a grand. A ready-to-shoot marker, with basic anno and good, but common parts, around two. A fully completed gun, with some really nice parts, custom-milled and fancy annoed, could knock on the door of three. I'd need 50% down to start, and delivery would depend on how wild we get.
I have been wanting for a while now to finish one up for myself.
Doc.Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
Paintball in the Movies!
- Likes 5
Comment
-
Interestingly enough, I had somebody swing by the shop today for a chat, who is interested in one, too. I dug out my box, and here's what I have immediately on hand:
The "Mini" body up top needs only feed necks and the detent holes drilled, and it's ready to go. It'll also need a back block, bolts and pins, and a pump rod to be a complete kit. I'm still a bit too tied up to get it anywhere by the end of the year, but if anyone's interested, I could have it in your hands- unanodized- sometime in January. Extra milling and anno will of course add to that.
The other three will obviously take a little longer. Technically one is already claimed, and I'd like to keep one for myself. I can, of course, make more at any time, or for that matter, could make the one for myself later.
If you'd like to talk about them, please hit me at doc (at) docsmachine.com I don't always have time to keep up on the various PMs, and sometimes it's hard to refer back to them weeks later.
Thank you!
Doc.
Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
Paintball in the Movies!
- Likes 6
Comment
-
Why are my pants suddenly tight in the front again?!?!?!? Oh man i've been wanting one of these forever....
WHO WANTS TO BUY SOME OF MY SPARE INTERNAL ORGANS?
"What could go wrong?" - Sethzilla!
Member of WORR BOYZ pump paintball team
Playing since 1986: Stock, Pump, Mech, Electro, tourney, but now mostly rec.
Feedback:
https://www.mcarterbrown.com/forum/b...lla-s-feedback
WTB:
https://www.mcarterbrown.com/forum/b...-wtb-wgp-parts
- Likes 1
Comment
-
Needs dual stock class feeds and a dual rod pump kit. That’s cool! I wouldn’t even bother with pneumatics. I would just make it a double barrel pump.
- Likes 6
Comment
-
Spider feed neck mount the top so you can run all kinds of different feeds. It would allow for anything that you can put on a Phantom or CCM. I would run dual threadserts like CCM dose so you could mount a CCI feed rockforward or rock back for you heathens. Omg Dual spring feeds! But I think pump would not only be more reliable but also easier to tune and cheaper to produce.
-
Since no double is ever gunna be "true" stock class, I would probably just use regular 7/8 feed tubes and run clamp on "Stock class" adapters but thats just me. These big boys are a lot of fun with small to large hoppers on them. Reloading 2x spring feeds aint too fun.
-
I can sure do that. Pump, mechanical, electro, halfblock, midblock, full size, mini, whatever you want. (And are willing to pay for.
Doc.Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
Paintball in the Movies!
- Likes 2
Comment
-
Dug through my files, and found a little more porn for you gents.
Here's the very first Vee-Twin I made, back in 2004, I think. Simon from Inception has it now.
This one is probably the third or possibly fourth? one I ever made, probably closer to 2005. The customer wanted a full set with both mech and pump accessories, the pump is "Purpleheart" wood, clearcoated. I made everything in that photo save the ball detents. (And these days, I even make those.)
Assembled in pump mode, she looked like this:
Doc.
Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
Paintball in the Movies!
- Likes 27
Comment
-
Will the new cnc machine crank out vee twins one day?'96 RF Mini Cocker, '95 RF Autococker, 68-Automag Classic, Banzai Splash Minimag, Gen-E Matrix, Shoebox Shocker 4x4, Montneel Z-1, Tippmann Pro-Carbine, Tippmann Mini-Lite, Tippmann Model-98, Tippmann 68-Special, Spyder .50 cal Opus/Opus-A , Tippmann .50 Cal Cronus , Gog Enmey .50 cal , Tippmann Vert ASA 68-Carbine, Bob Long Millennium, ICD Grey Green Marble Splash Alleycat Deluxe (runs liquid co2) , Halfblock 2K4 Prostock Autococker , 2K RF Sniper II
Meleager7 Feedback: https://www.mcarterbrown.com/forum/b...ager7-feedback
Mel Eager Productions, Paintball Videos: https://www.youtube.com/@meleagerproductions9082
Comment
Comment