Freaking the Unfreakable?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DocsMachine
    MCB Member
    • Jul 2020
    • 2715
    • Alaska

    #1

    Freaking the Unfreakable?

    I've had an idea, for a good number of years now, for a mod to a Freak back, that will allow for 'retaining' the inserts. That is, the insert will only come out the front.

    I know, for example, that the Carter pumps that take removable barrels, could use such a thing- I made a one-piece, from-scratch Carter Freak many, many years ago:



    There's also the Ranger, for similar reasons, and the M-98 because of the way the bolt fits. What else might need a 'retained' Freak insert?

    The OD of the mod would be too big to fit an SL-68, and the "knuckle" where the back meets the tip is definitely too big for the pump bore. I believe the old Brass Eagle Cobra would need such a thing (though, it's worth asking, who would buysuch a thing for one? )

    The 'Mag, of course, and I may be attempting something like that shortly on a Stingray. Anything else?

    The other half of that question is, of course, does anyone even want such a thing? A 'Cocker-thread back, as far as I'm aware, would work on a fair number of Carters and Rangers, so if anything, I'd make a small handful of those. Anything else- like a Cobra back- would have to be by special-order.

    Doc.


    Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
    The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
    Paintball in the Movies!
  • Jordan
    I. Am. Canadian. 🇨🇦
    • Jul 2020
    • 3484
    • Southern Ontario, Canada

    #2
    AP Vector?

    Comment

  • Toestr
    Certified Post Whore
    • Jul 2020
    • 2875
    • Poland, Onterrible

    #3
    The Mag one is interesting.

    Sent from my Pixel 4a using Tapatalk

    Comment

    • phy
      Rockin and Cockin
      • Jul 2020
      • 77

      #4
      Been wanting something like this for my ranger for a long time. Hopefully you do some in regular freak length bull barrel style.

      Comment

      • nerdcore
        Sweet Liberty, my arm!
        • Jul 2020
        • 512
        • Crashville

        #5
        "Freaking the Unfreakable" sounds like a docu-series about discovering new fetishes.

        Comment


        • William the Third
          William the Third commented
          Editing a comment
          I was going to say "I would watch that", but let's be honest, I'd probably be featured in it.
      • wthomas333
        MCB Member
        • Jul 2020
        • 577
        • AL

        #6
        BE Raptor. And if you have interest in doing one, I have interest in paying for one

        Comment

        • Hellion360
          Power Lurker
          • Jul 2020
          • 2478

          #7
          I am sure it is a small market, but if I owned a buzzard (and I have owned a few in the past) this product would excite me.
          Need Inception Designs or Shocktech Products? Let me know!

          MCB Feedback --------- MCB Consolidated WTB

          old PBN feedback

          Comment

          • DocsMachine
            MCB Member
            • Jul 2020
            • 2715
            • Alaska

            #8
            AP Vector?
            -There's more keeping us from Freaking a Vector than just being able to retain the insert.

            The Mag one is interesting.
            -I may try one for giggles, but the twist-lock grooving is tricky to machine.

            Been wanting something like this for my ranger for a long time. Hopefully you do some in regular freak length bull barrel style.
            -That's kind of what I'm leaning towards. Both the Ranger and the Carters will want a nominally 1" OD barrel. Make some in black for the Rangers and leave some polished for the Carters.

            BE Raptor.
            -Already in the works. The batch I'm working on is specifically trying to fill a few holes that haven't been made in a while- ICD, VM, Ion, etc. Was planning a few (like, less than five each, at least for now) for things like the Raptor and F1 Illustrator.

            Doc.
            Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
            The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
            Paintball in the Movies!

            Comment

            • XEMON
              Frenchy is here!
              • Jul 2020
              • 3034
              • Nor Cal

              #9
              Originally posted by DocsMachine

              -There's more keeping us from Freaking a Vector than just being able to retain the insert.

              Doc.
              any chance you'll ever make a run? 😅
              I love RF, but low rise feedneck would be nice ...
              Love my brass ... Love my SSR ... Hard choices ...

              XEMON's phantom double sided feed
              Keep your ATS going: Project rATS 2.0
              My Feedback

              Comment

              • Cunha
                Certified Post Whore
                • Jul 2020
                • 2043

                #10
                Collecting and freaking a bunch of Nelson 007 bodies would probably be the most godly of gods work

                Comment

                • DocsMachine
                  MCB Member
                  • Jul 2020
                  • 2715
                  • Alaska

                  #11
                  How about a Blade? I remember thinking I ought to make a couple, just for giggles, a while back. Doesn't need the 'retaining' part, but if any of you out there have a Blade that you actually use on occasion, hit me up.

                  Doc.
                  Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
                  The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
                  Paintball in the Movies!

                  Comment


                  • William the Third
                    William the Third commented
                    Editing a comment
                    I've got two blades, I just don't recall if they work, and more importantly, I don't recall where they are...
                • DocsMachine
                  MCB Member
                  • Jul 2020
                  • 2715
                  • Alaska

                  #12
                  [/any chance you'll ever make a run? 😅
                  I love RF, but low rise feedneck would be nice ...
                  -I can look into it, I have a Vector around here somewhere, but as I recall, last I thought about it, it'd be a lot of custom machining. Meaning something like a $200+ barrel.

                  Collecting and freaking a bunch of Nelson 007 bodies would probably be the most godly of gods work
                  -You mean like these?





                  I've done about half a dozen of those. It's not cheap, as it's kind of tricky work, but definitely doable.

                  Doc.
                  Last edited by DocsMachine; 12-30-2022, 03:09 PM.
                  Doc's Machine & Airsmith Services: Creating the Strange and Wonderful since 1998!
                  The Whiteboard: Daily, occasionally paintball-related webcomic mayhem!
                  Paintball in the Movies!

                  Comment


                  • Cunha
                    Cunha commented
                    Editing a comment
                    Hmmm yessss, gods work.

                  • Brokeass_baller
                    Brokeass_baller commented
                    Editing a comment
                    Not cheap as in under $200? Or over $200? I have an original bolt action Nelspot that I'm slowly piecing together, and the $200 or less option is not out of the question. Over $200 is still within realism for me. Just might take a minute to set funds aside.

                  • netsurferdude2
                    netsurferdude2 commented
                    Editing a comment
                    I can see the added difficulty with a vector barrel being the front mount which hold the barrel in place. That is 3 tapped hole which may interfere with where the freak sits.
                • Jordan
                  I. Am. Canadian. 🇨🇦
                  • Jul 2020
                  • 3484
                  • Southern Ontario, Canada

                  #13
                  You'd probably need to go XL Freak but if you bored from the business end and threaded it for a Freak tip would it work?

                  Comment

                  • latches109
                    Always Sciencing
                    • Jul 2020
                    • 2111

                    #14
                    I would get a Carter buzzard freak, a mag

                    Comment

                    • Guest

                      #15
                      Can a Bore Drop Buzzard be freak bored?

                      Comment

                      Working...