Freaking the Unfreakable?

[MrBarraclough]

My instinctive reaction to the idea of a Freak insert in a 'Mag twistlock barrel.

[DocsMachine]

'Kay Lööps, you're right, most 'Cocker barrels won't fit for more than a thread or so. And the other gun, while I haven't dug out my one and only Spartan barrel to check it, it's definitely not WGP thread. I may have to custom-fit these things- at least to the Carters.

Got some questions I'll PM, but nothing big. This should be fun.

Doc.

[Loophole]

Exciting! Can't wait to see the Doc Magic unfold.

You are going to have two very happy customers =)

[DocsMachine]

Loopy's Freaky Carter!







Sorry it took so long Löops, the gun itself has been done for a while, but it took longer than I expected to do up a short run of the L-stocks, since I had several standing orders for them. Got a PM heading your way with the details.

For everyone else, like my test piece earlier in the thread, it's basically a four piece barrel now- two parts to the back, the tip and an insert. The two back halves are lightly Loctited together, and don't really need to be disassembled- they should even be able to be anodized as one piece.

I've got Loopy's two Carters done, and have five more semi-finished backs that can be threaded to fit the marker of your choice. If you have something like a Ranger, I can just cut that to 'Cocker thread and send it, but if it's another Carter, just to be on the safe side those should probably be custom-fit. (Unless you're 100% positive it can take standard 'Cocker barrels.)

Doc.

[Loophole]

Amazing work Doc! You continue to outdo yourself sir. Thank you so much!!

[M98punk]

Generation 1 PPS Blazer??

[SETHZILLA!]

I've got my very first gun, a Brass Eagle Cobra sitting on the wall ready for a new barrel - I'll send you a PM. I also have a Ranger with a barrel I could send along...

[DocsMachine]

Generation 1 PPS Blazer??

-I have a couple of those waiting to go out in the next anno batch. Both first and second gen.

I've got my very first gun, a Brass Eagle Cobra sitting on the wall ready for a new barrel - I'll send you a PM. I also have a Ranger with a barrel I could send along...

-I have a Cobra on hand, it was my first gun too. As noted earlier, I was thinking of making a couple anyway. Ringed full-diameter tip and all. I was going to do those up as the Bulls, as in taking the XL inserts, simply so the back/tip seam isn't halfway down the pump.

Ranger should be easy, no fitting necessary, since those are, in fact, strictly 'Cocker threaded.

Doc.

[SETHZILLA!]

Pm'd ya Doc

[M98punk]

-I have a couple of those waiting to go out in the next anno batch. Both first and second gen.



-I have a Cobra on hand, it was my first gun too. As noted earlier, I was thinking of making a couple anyway. Ringed full-diameter tip and all. I was going to do those up as the Bulls, as in taking the XL inserts, simply so the back/tip seam isn't halfway down the pump.

Ranger should be easy, no fitting necessary, since those are, in fact, strictly 'Cocker threaded.

Doc.

how does one get one of those Gen 1 barrels??

[DocsMachine]

how does one get one of those Gen 1 barrels??

-There's a complex process involving runes, candles, exotic incense, fasting, meditation and email. But it's mostly the email thing.

I still have some other parts to finish before I send this next batch off for anno, so the only thing I have on hand is bare aluminum. If you're not in too much of a hurry, I'm hoping to get the batch off this coming week, and then it should be three to six weeks to get 'em back.

Doc.

[M98punk]

I’m never in a hurry these days about such things. I’ll work on the email after I carve these runes. Always the little accent tails that give me a dickens of a time.

[DocsMachine]

Update!

I have a post in a new thread in the Airsmiths' section about these barrels. I now have a small stash of "Blank" barrels ready to go, waiting to be threaded to whatever marker you might want them for.







I'm thinking I'll include a few basic 'Cocker thread ones in with my next batch of black anno, but the rest will be 100% made-too-order. Feel free to hit me up if you're interested!

Doc.

[SETHZILLA!]

Sending you a PM

Sent from my SM-S901U using Tapatalk

[DocsMachine]

PM replied. You're right, that is an awful lot of mayo.

Doc.

[DocsMachine]

All right ladies and gents, I can now Freak the Unfreakable.



I have about 20 of these backs finished to the point they can be fitted to any marker that needs it.

Keeping in mind these specific backs retain the insert from coming out the breech. They're mainly meant for guns like the Ranger and many Carter pumps, but could also be fitted to Raptors, Model 98s, and anything else that doesn't otherwise positively stop the insert.

If this is something you need, hit me up, and we can talk particulars.

Doc.

[Euphie]

If it could be fit to a raptor does that mean it could also be fit to a Tigershark which iirc is just a raptor barrel but, a bit shorter?

[Brokeass_baller]

So... What about F2 Illustrators with the thumbscrew barrel, while also retaining the foregrip?