Nova Cocker-based Pump Teaser

[Psycho91]

I normally don't watch videos in threads for some reason idk why

[superman]

I wonder who got #1, nova probably kept it for themselves I would guess

Docfire. It's in the video above.


Sent from my iPhone using Tapatalk

[Psycho91]

I wonder who got #1, nova probably kept it for themselves I would guess

[latches109]

thanks for this. AIR IT UP!

[Luscious]

Just watched the above video- Thanks Docfire! Didn't realise they even had serial numbers. Even more shocked to see I had No. 2!

[docfire]

NOVA Pump open box first impression

https://fb.watch/uJoWWZlryq/

[docfire]

They do it a .677.

[iamthelazerviking]

I've noticed that too, splotchy ano.

[Psycho91]

Some of these look so sloppy though, like whats with the big splotches in places on some

[latches109]

Myrkul "If you call up Chris & TJ at Nova, they'll tell you that even a single batch of "o" rings is going to vary by about 20% in actual measurements across the entire batch. " lol zero reputable companies have a 20% tolerance. Tolerances are 1%, and up to 5% if you are super cheap. Sounds like an excuse for improper machining or design. A standard like AS568 would be pointless if they do not follow the dimensions, shore hardness etc..

[Myrkul]

@vegabond

The pressure a marker is happiest at is going to be pretty different from marker to marker, even across the exact same model. You add in litteraly anything aftermarket, and I mean ANYTHING, and the pressure becomes the wild west. If you call up Chris & TJ at Nova, they'll tell you that even a single batch of "o" rings is going to vary by about 20% in actual measurements across the entire batch. It makes way more sense to tune your markers around the springs that are in it then around a specific pressure range. Go for the lowest possible spring tension to smooth out the overall operation, and then set the reg to whatever it needs to be at to hit velocity. Double check that there is no shoot down and that the reg can keep up, then go play once you are hitting field velocity consistently with no shoot down.

[iamthelazerviking]

You make adjustments on your reg after taking chrono readings. Look up how to sweet spot reg on Autococker on YouTube

[Vegabond]

how do you use a chrono to set your reg?

[Myrkul]

100% this. I have found Ashcroft gauges to hold up really well.

Also, food for thought, you don't really need to know where your pressure is at....I almost always use a chronograph to set my regs.

[russc]

WGP kits rode on the barrel and used it as a guide rod.