Racegun Revival

[Majinebz]

I responded to your message. Lmk if it went through.

[mtrepanier]

If anyone want one. I have material to do 1 or 2 battery pack left

[BrendanB]

pmed

[mercpb]

I've been occupied with other markers but I have a race gun.thatll need refurb, prob need one of these battery packs. I'll get it out tomorrow to start figuring what's what

[Majinebz]

New battery in the 04 DC halfmill excalibur racegun. Very nice! Thank You very much!!

[Clubbe]

Woooow, I didnt know that woould even work.
Now im impressed.

[Majinebz]

To do this on a excal frame it had to be UL milled first Then additional milling for the com port, touch pad, contoured in the front for the board to slide in and a new hole drilled to pin the leaf spring switch hole.

The leaf switch also has to be desoldered and resoldered on upside down on the board to be in the correct position for the trigger to activate.

Its is a tight fit as you can see with the old battery. But works as it should.

[Sharkytrav]

Anyone hear from darkapollo recently? He has been working on a marker of mine since 1/24 and we have had a pretty good line of communication going, but I haven’t had a response since 3/6. Starting to get a little worried.

[SETHZILLA!]

I haven't heard from him in a while either. I just want my Freeflow back if the Raceframe board isn't salvageable. I have the mech frame ready.

Sent from my SM-S921U using Tapatalk

[dkfactor]

Any update?

[Trbo323]

Super Nova . Send like this thread may be off interest to you

Sent from my motorola edge 2024 using Tapatalk

[Super Nova]

I sent him my race vertebrae for a new battery and got it back pretty quickly but that was a few months ago

[Sharkytrav]

No new news

[Sharkytrav]

Got a very nice surprise package today with all my stuff back from DarkApollo. He spent a good amount of time on this gear and made some major positive progress in getting it running. It isnt 100% yet and that is okay, the last little bit seems like a hardware issue that I can fiddle with myself.

I was never really worried that my stuff had disappeared and I hope everyone else who needs stuff back gets a nice surprise package this week. And I hope Racegun revival keeps returning markers back to life.

[mercpb]

good news! yea I would have been surprised if ghosted too, not the vibe I'd gotten

[baconquilt]

Trying to revive my Frankenstein. A Race powered MQ slider RF. Hoping the battery takes a charge.

[baconquilt]

[baconquilt]

OK so it seemed like it started to charge. The LED on the on/off switch was flashing green/red. The green LED stayed lit when the red LED lit up. Is that an "orange" color in the manual or are the colors just red and green flashes? I didn't know if there was a diagnostic chart showing colors and flashes.

Anyway, after about 10min, I got a error buzzer from the sound of it. The speaker on the board was pulsing on and off to sound like a error tone. Is that the tell sign of a bad/dead battery? Something else bad?