Racegun Revival

[Majinebz]

I responded to your message. Lmk if it went through.

[mtrepanier]

If anyone want one. I have material to do 1 or 2 battery pack left

[BrendanB]

pmed

[mueller]

I've been occupied with other markers but I have a race gun.thatll need refurb, prob need one of these battery packs. I'll get it out tomorrow to start figuring what's what

[Majinebz]

New battery in the 04 DC halfmill excalibur racegun. Very nice! Thank You very much!!

[Clubbe]

Woooow, I didnt know that woould even work.
Now im impressed.

[Majinebz]

To do this on a excal frame it had to be UL milled first Then additional milling for the com port, touch pad, contoured in the front for the board to slide in and a new hole drilled to pin the leaf spring switch hole.

The leaf switch also has to be desoldered and resoldered on upside down on the board to be in the correct position for the trigger to activate.

Its is a tight fit as you can see with the old battery. But works as it should.

[Sharkytrav]

Anyone hear from darkapollo recently? He has been working on a marker of mine since 1/24 and we have had a pretty good line of communication going, but I haven’t had a response since 3/6. Starting to get a little worried.

[SETHZILLA!]

I haven't heard from him in a while either. I just want my Freeflow back if the Raceframe board isn't salvageable. I have the mech frame ready.

Sent from my SM-S921U using Tapatalk