What Are Your Current Paintball Projects

[Ecapnation]

This hilarious comedy of miss steps....

I did things in the wrong order and ended up with a taper in the lower right side I can't correct along with a weld deformation because I machined the feed area too thin. This one is a shop gun now.... Ugh

I won't explain what's going on with all that.....

[bellicose]

Well, it looks cool doing it.

[Raven911]

I’m caught up. Got the PGo and P68SC rebuilt and working. Everything else it clean and functional. And now I’m alittle bored because of it.

[Cdn_Cuda]

That just means it’s time to get a new project!!

[Magageddon]

I picked up this OH Mag a few months ago, finally got around to ordering a rebuild kit and regulator nut, gonna get her dialed in soon

[zinger565]

Just picked up a B2K4 w/pds and a Dangerous Power trigger frame. Gonna try to cobble together my own trayless kit and throw in a morlock board for modern play. If it works, might even send it out for anno.

Morlock's in, however I may go for a Choas board and save the Morlock for something else. DP frame isn't going to work, however, I picked up an FEP Quest frame from ebay. I'm hopeful that I will be able to get that to work.

Still planning of experimenting with some 3D printed bolts as well.

[Brokeass_baller]

Chaos is excellent

[Jordan]

SPAR frame on a Micromag in Wild Tiger anno... I've been playing around with the setup trying to find one I'm happy with.

[Meleager7]

that bottomline palmers reg looks really good on there!

[Chuck E Ducky]

Still getting my Doc Double Pumper parts together probably going to fabricate dual Stick feeds for it. I got a Mozak frame an AKA reg dual Sconi freak backs and dual Dye tips.

My first mag build will be functional soon as well. Just getting those parts together after it’s functional I need to pick a flashy Ano to complement the Carbon Fiber.

[Jordan]

Warp-less build for the Micromag.

I've bought a few packages off Kijiji over the last few years that have had Halos included - not always in great shape - and time and ambition finally happened at the same time. 🙂

So far the proof-of-concept version of the project works... to pretty it up I'm going to have to buy some longer Warp hose and a better PF plug for the PTP Warp adapter (it doesn't fit properly and there's a lip that prevents correct feeding).






#leftfeed4life 😉
Meleager7

[Meleager7]

very coo, but now you can't bring the micromag to "No Batteries" in November ! Unless, you can figure out a hand crank system of some kind !? :P

[devilzcall]

How about a ripcord

[Jordan]

Meleager7 - I probably won't anyways, without a lvl10 I don't trust it without a force-fed hopper - way too easy to rip on it and chop.