What Are Your Current Paintball Projects

[iamthelazerviking]

CCM S5 prototype bodied sniper. Was modified to also take Phantom feeds! Got it in a trade with different parts, parted out almost everything it came with and started fresh with my own parts/liking.

Made a thread for the build.

[Myrkul]

Tippmann 98 x2 (Powder Coat and Clean Up)
Spyder AMG (Clean up, VS2,)
Bob Long Millennium (Awaiting Anno)
FBM Spyder (Collecting Parts)

Tippmann Prolite: HPA compatible (temporarily suspended)
Tippmann 68 Special: HPA compatible (temporarily suspended)
Tippmann SL68 II (temporarily suspended)

Top Secret ICD Bushmaster B2K & Bob Long Defiant (If I ever find both the ambition and motivation)

[RAZRBAKK]

Funny that you ask, since I just organized them and their parts this afternoon.

Stock Class PMI Trracer
Going to be removing the feedneck and one pump arm, drilling and tapping for a phantom SC feed I have kicking around, and I'm planning on running it hawaiian style. Still need to source a barrel.

Pneumag
This one is waiting until the winter. Grabbed an LPR for it and will be sourcing the rest soon.

RF sniper
Can't decide if I want to make this one SC or just slap a 50 round on it and call it a day. Needs a frame, internals, and a reg.

GZ2000
Undecided. It was given to me by Toestr and I haven't had a chance to do anything with it. Hopefully soon.

[euangelion]

Meteor just needs an LPR and ram.

[Mr. Hick]

I have 2 nelson based wood stock builds I want to get going and one Sheridan based one too. Mostly looking to make them winter projects, really. Not sure if i'm gonna go SC route for all three or try and keep a couple open class. depends on what the wood Gods do for me.

[ChoSanJuan]

Finally time to drop what I'm working on. This weekend is our local scenario game - Fallout: Northlands IV, at The Siege. Time table-wise, it was supposed to be ready for Michigan Monster Game to field test, but life had other plans. it's close to 100% ready and just needs a little paint and vinyl.

I present: Nekomata!


It's a magfed, bulpup, Mech Ion, stuffed inside a Nerf Firefly Rev-8 shell!

[Seajay]

Very sci-fi looking, awesome.

[ChoSanJuan]

Thanks! That was the effect I was going for! Huge Destiny fan and figured it would be a good time to make something in that scifi vein to use for Fallout. As many that know me, know... I don't subscribe to milsim but I do enjoy the idea and r&d behind magfed. This is my way to bridge that gap.

[Jordan]

Well, the thread worked for me at least.

I'm almost done, just need to find a macro fitting and maybe tear it down to paint after testing.

Did I mention it's still electronic? 🙂

[Jordan]

I'm just running a stock board for now... it seems to be able to cycle the bolts with qevs installed, but I haven't tested the ROF it should be capable of. We'll see.

[ChoSanJuan]

This makes me way to design a new tray for the ion and make a dually mech!

[devilzcall]

Would you be able to mod the bolts with an additional o-ring like you would on a mech conversion to stop it leaking when fully extended, and then swap the front and back input on one of the engines?

[Arthur]

Hitting my projects again soon, here's mine:

Side feed mag
I have a rare (or I think rare) side feed tac-one body
I need a rail that will accommodate a dye single trigger frame
I have the trig frame
I'm going to back bottle it too
My buddy prints me magwells that can adapt on to the side feed, plan to shoot it this way. likely with Dye mags.
Long term I have plans for a box loader
Will likely just send it all to superman to build anyway

Ano Jobs
Still need to ano the inception designs body on my PE Etha 2. I kind of liked it raw dog, but I read its not such a great idea.



Just finished this yeet canon recently too

[Alexndl]

Finish my KP2 bolt action, missing sone parts from PPS and should be good for widget and assembly

Finish my mini-midget-halfblock pump trilogy and try to get constant velocity

Tune the spring on my single shot Sny nelly

Finish and tune my stock class cocker for max efficiency (would like to get 40 per 12g)

3d pring a poor man Duck slide for my stock class Sny nelson

Many more project but those are the main ones

[moving_target]

Double barrel (triple? Quad? I have seven...) GI-50

hunt down some reg issue on a vanguard demon

Trilogy SF needs some finishing

Pile of ions I either need to do something with or get rid of

Need to go over my tippmann collection, replace a bunch of ball detents.

Fix the TM7 trigger, I think that's all that's left after a full solenoid replacement.

Several brass projects I haven't decided on a direction yet.

Couple of cockers that need timing.

An etha 1 that needs a once over and donor reg and ASA before getting rid of it, that's been sitting on the bench for three years now...

[Altec]

These are my two projects currently. A new Sniper build, and restoring a Classic Timmy with a Sci-Fi board.

[Kit]

Trying to build an eblazer.

[Brokeass_baller]

I'm trying to get my gear setup the way I want for my forever collection. I'm kinda done gun whoring. I have everything I want, and I'm perfectly happy with it all. So I've been slowly selling off what I don't really want, and buying things to setup what I want to keep the way I want them to be.

-I want to modify an Ion body onto my eNMEy. It already has an Empire Relay and gas-thorough mod. A nice body will just top it off.

-i need to send a few bits out for ano for my "nice" autococker. It's a dust clear 2k3 prostock (or whatever, I'm not sure when they started using that name). I just need my Shocktech slider and feed neck ano'd to match. The feed neck color is off, and the frame is raw.

-my "ugly" autococker is a right feed 2k1 with a terribly faded body that I think just looks so cool for some reason. Stock ugly brass pneus, Palmer Rock, Benchy slider. Everything internally is butter though. I have a fat PMI Perfect expansion chamber on it. I just need a bottom line regulator (I'll probably get a Stabilizer), and maybe upgrade the trigger plate and sear when Nummech gets more Telios stuff in. I also have the stock barrel I'm going to throw on my new lathe and Freak bore, and I'll probably drill some porting too. I'm basically going for my dream gun that I lusted over when I was a broke kid, but also keep it kinda sleeper-y.

Those are the big ones. Other than that, I just want a Chaos board for my B2K4, and trigger guts for my Millennium Spyder, and a Cali-style stock for my Hammer II. And I have a Nelspot I need a valve for, and battle grips when the good fellas here get them figured out in the 3D printing forum.

I'm slowly building up funds and checking them off my list.

[drewkroeker]

-I have a dye dm3 in pieces on my floor. Trying to decide between the UL frame with nice CP magnetic trigger or the stock double trigger frame and Tadao 5.0 board. When I used the gun this year I couldn't believe how heavy it was compared to my modern tournament shooters. I have an Invert halo too cut up and shoved in a tupperware container to make a boxmag for the dm3. Also in a box is a Virtue ego 7 board that I'm thinking about putting inside the boxmag and using that to run the dm3. More adjustable settings than the stock UL board. Rough testing has not been promising; the halo board is so far away from the breech that it wasn't picking up every shot. Pretty sure the sensitivity is turned all the way up. Sticking with a rotor on top is just simpler and easier.

- I am restoring a BT tm15 that my buddy purchased. I couldn't stand the tiny little access hole for velocity adjustment so I convinced him to ditch the stock, now I can add the head of a 3/8 cap screw to the velocity adjuster so it can be accessed through the rear. I made my own regulator disassembly tool out of a chisel and it works fine. Only problem is trying to disassemble the rest of the reg, there's no 3mm nut to turn, it's just a round little pin. None of the videos or posts I've found online have given me any progress. It may need a whole new regulator, and at that point may as well get the relay ASA. I added a thin layer of JB weld where the feedneck sits, hoping to take some of the wiggle out of it. Also it has the version 1 solenoid, which may continue to work or it may crap out next weekend. Nothing like buying a $200 marker and finding out you might have to invest $200 more to get it shooting consistently.

- gopro mounts in the beginning stages. I made an aluminum plate to fit inside my mask and bolted a 3D printed gopro mount. Next I want to lower the gopro 2 inches using 1/8" thick aluminum chunks. Also I'm trying to figure out how to bolt an aluminum bracket to my mg100 back-cap, a gopro will go on there as well.

[spikeball]

Nothing major but a lot of consolidating and selling about to happen I think. Here's what I have in mind...

- Finish another parts Phantom with under cocking kit. Put up for sale.
- Swap out frames and pump kit on my splash 2k vert cocker. Sell this one.
- Put a trigger back into my MacDev Droid. Sell.
- Try to get my Azodin KD3 working right. If I can't, I'll sell it too.
- Finally put a detent in my Spyder barrel modified ER2.
- Get my extra GTI parts kit anodized along with a new trigger for my XTS.
- Reglue my Crossover modified single trigger frame with some real plastic glue instead of just super glue.
- Put the regular Crossover frame back together.
- Finish the Bob Long Spyder trigger frames with all their parts.

Whew... Lots of little stuff.