Got mine in. It had a plate, so I went ahead and set it up with the CCM trashcan reg I've been meaning to use on a build. The main spring mine came with was 1/4" or more shorter than a regular cocker spring. I didn't like having to screw the IVG in so far, so I threw a CCM spring in there and have it shooting 300 with the included valve spring.
I haven't checked every screw, but the one thing that was kind of annoying is that the hammer lug takes a 2 or 3mm allen instead of the usual standard size. Everything else seems to be standard that I've tested so far. Just a little weird to mix hardware IMO.
I haven't checked every screw, but the one thing that was kind of annoying is that the hammer lug takes a 2 or 3mm allen instead of the usual standard size. Everything else seems to be standard that I've tested so far. Just a little weird to mix hardware IMO.
Comment