What Are Your Current Paintball Projects

[Knuckle Dragger]

An 05 Superstock I’ve been shaping for a year now. Not sure when I’m going to finish it, been shifting my attention to other things. Still need to get it cut for mid-block, finish blending the extended reach, source an lpr and anodizing.
5AE99341-E9DC-4EBC-971B-1B99FAEF0FAD.jpeg

[zinger565]

Just picked up a B2K4 w/pds and a Dangerous Power trigger frame. Gonna try to cobble together my own trayless kit and throw in a morlock board for modern play. If it works, might even send it out for anno.

[Trbo323]

This flash, which somebody thought needed to be spray painted over. See the forgrip, body is cleaned up already

On one hand the spray paint probably protected it a bit over the last decade. On the other....I have to remove it....

Sent from my motorola edge 5G UW (2021) using Tapatalk

[woouulf]

1 Finnish GX5 prototype ( cant decide on the frame)...Pic 2&3..
Build the NOS GX5.. pic 1
Build once more the empty GX5 Lapco body and have eye covers made...pic 3

[devilzcall]

Definitely the frame with finger grooves, it's a much better match for the aesthetic of the body

[Cyrus-the-virus]

I have a PPS Squall I need to put back together. Going to possibly get a K frame for it too.

[Roger7pball]

Got the Morlock MK3 and an Autococker to come to an agreement.

[Jordan]

I am made of questions, mostly on how to wire/configure everything.

[Roger7pball]

I based the settings off of the Eblade’s manual, the fast settings. I’ll snag a screenshot of it in the Morlock app. I’ll throw a quick wiring diagram together at work tomorrow. Pretty straightforward, hardest part was the microswitch mount but came up with a fairly good idea.

[JeeperCreeper]

Just posted my latest project in the sheridan section. It's a fun one for sure

[Magmoormaster]

This is out for ano, should be done in a few weeks.

I'm casually working on a 95 cocker that i'm throwing some fun parts on; meteor single hole grip frame, Bill Macke reverse front block, I'd like to get a jam bolt for it too.

I also have an old Spyder One I'm building up with some kinda cool parts. Has a Bob Long double trigger frame and a flush cocking kit. I just recently thought up a way I can easily convert it to centerfeed using the feedneck block from a Boss Raider. Trying to go low-ish pressure too.

The last two aren't technically mine, they're just junk guns at my proshop I'm messing around with.

[devilzcall]

What does the reverse Frontblock do?

[Magmoormaster]

It reverses the LPR and the 3-way on the block, so the 3-way is below the ram and the LPR is on the right. No performance change, just different for the sake of it.

[Toestr]

Basically everything is a project for me...

But this is the one that I can actually see a horizon on. It's just a mock-up right now. It will have some sort of LP valve in it and I might switch the Flatline out for a screw in Maxflo bottomline. I hope the VA doesn't restrict flow too much.

[Trbo323]

Why would someone spray paint over this!?!?

I'm a little miffed at this one

Sent from my motorola edge 5G UW (2021) using Tapatalk

[zinger565]

Probably for "stealth".

[Cdn_Cuda]

That came out nice and clean

[William the Third]

I finished a project! Cleaned this up and fixed the leak.

[lhamilton1807]

Wow, that’s gorgeous! I love the cowboy gun style

[Trbo323]

4 down (one not photoed) 6 to go

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Drcemento]

Sanded, polished and re-blued the rusty rear bolt housing from a 68 special that I picked up from an MCB’er last week. One of my favorite looking and feeling guns ever - has that brutal utilitarian gun like look to it (till you add a hopper anyway). Almost got all the parts I need. Will let the blue go overnight and warm it up for a hot wax on the exterior for some protection

image_32389.jpg
image_32388.jpg

[Trbo323]

6 down, 4ish to go

Sent from my motorola edge 5G UW (2021) using Tapatalk

[zinger565]

Great work on these! Man that Sonix looks cool (minus the green), been a while since I've seen one of those.

[Jordan]

I'm converting my Nasty to a Hurricane with TPGM™... Sheridan grip frames are way too small for my hands and uncomfortable with a UMB.

I've got the body mods done, just waiting for the 4way I bought on Ebay to arrive so I can finish the trigger mods.

20220522_080433.jpg