Nova Phantom Duckslide kits

[latches109]

Nova: "All nova slides are built to looser tolerances to smooth out the pump stroke and accommodate any variance in the size of the parts used underneath."

lol what a joke - good way to hide incompetence. I thought these guys would learn a lesson after the nova valve. Appears they do not care much about quality, as their track record shows. I dove my NX1 off the lot and lost $100 in value instantly

[$L!mBo]

definitely a "Damage Control/trying to cover our butts" lame excuse

[JonM]

I wonder if the loose tolerances are more of a side effect of the 3D scanning than a deliberate design decision.

[$L!mBo]

@JonM
it had to do with their tooling.

[Murph]

Mine showed up. There are some very rough cuts, large burrs and surface defects. I may have to find an airsmith to clean it up before anodizing. Wasn’t expecting master craftsmanship but this is still not something I am happy with.

[Chuck E Ducky]

I feel like it can be saved but it’s not a drop in peace that’s for sure. It needs more work to be right. It’s definitely ruff from an anodizing standpoint. I plan on cutting one up anyway to make it my own. Can you measure the ID of the barrel opening? I wonder if a Doc Bull Cocker barrel will fill the hole if you make room for a round head body.

[Murph]

I can go one better. I own one of those bull barrels. The tip fits in beautifully, but it needs a polish for sure. Feels a little gritty coming out.

[Chuck E Ducky]

Smaller is easy tho especially since can spin it in a lathe.

[Chuck E Ducky]

I wonder if you can just machine out the back side to fit round heads and make a Delrin sleeve that’s captured behind the slide itself. You could make different sizes for different barrels. Spin them up on a Lathe easily. If it rode on Delrin it would be much smoother and you could match the barrel to your build.

[$L!mBo]

for sure possible. theres definitely enough meat for it

[Murph]

The bore pictures chuck e ducky asked for

[Super Nova]

Maybe someone can run a batch of freaked bull barrels for these??

[Chuck E Ducky]

I’m thinking Docs barrels will work if the bore of the slide is honed out a lil. But the issue is they are cocker threaded.
So you would need to clearance the slide so you could fit the round head ASP body into the slide. It currently won’t fit because round heads don’t taper at the threads due to the OD of cocker threaded barrels. Should be a simple fix. Docs makes his barrels in both xL and standard freak. I’m sure we could have the tips made to any length we want if we ask. His longer ones he sells now could be cut down super easy. They are unported too so you might get a lil more efficiency out of them for 12g play. Should Give you a cool sound sig out of it and look good with a fat barrel poking through. It would take the slop out of the slide to since it rides on the barrel.

[Cyrus-the-virus]

^ that sounds like it would be a perfect setup. I have a round body sitting around. I may have to pick up a v2 and send it off to someone to get the fit and finish up to snuff.

[$L!mBo]

Chuck E Ducky

barrel-body not the same bore. close but the barrel is tighter slightly

[Lt. head-shot]

I wonder if Nova would be willing to give us the option to have them bored out completely for a roundhead/bull barrel setup

[$L!mBo]

personally, i would just ask a third party for any additional work.

[Lt. head-shot]

True, good point. I mean I need a roundhead too, so it’s not like this is happening any time soon

[fullofpaint]

Maybe I'm just being cynical, but this screams cash grab to capitalize on our mistake.

[Chuck E Ducky]

Yeah you’re probably right. At that point just get a an actual Duck Slide. Although, those would still need to be machined and anodized as well.

[nuclear zombie]

I'm not part of the group, did they say what the magfed body in the middle of the picture is for?

[redsquirrel]

When I talked to TJ he said they were working on a magfed. Guessing that’s it.

[Riot]

I gotta be honest, they do really good put together…

[Brandon]

https://www.thingiverse.com/thing:6968233

this might fix a bunch of barrel wiggle problems, not mine but I wanted to share

[iamthelazerviking]

Well done Gil

[Chuck E Ducky]

Seems pretty simple. I wonder how it looks Installed,

[BLachance75]

Looks pretty slick when it's installed

https://www.youtube.com/shorts/xSX2uufU3dI

[flyweightnate]

My dryer sings that same song when it's done.

Oh, and the sleeve looks like a great solution too.

[Chuck E Ducky]

Nice!

[redsquirrel]

Anyone heard any news or timelines on the V2? Called nova a couple weeks ago and they said they were machining them at that time and to check on Facebook. Haven’t seen anything on the public page and don’t have an account to dive in further. Will call again next week to check in but figured some others here are also looking to swap for a v2.

[Lt. head-shot]

Here's what TJ posted a few days ago

[Chuck E Ducky]

I’m using a different feed that don’t need the clearance for my build if you want to sell it Moo

[XEMON]

They had a chance to redeem themselves, but it seam they are shooting themselves in the foot ...
Are they expecting their customer to pay for return shipping for an item that doesn't work as intended?

[Super Nova]

They didn’t say anything about covering return shipping when I called so yea as far as I know it’s on us.

[Cdn_Cuda]

They are releasing a version 2 of these.

[redsquirrel]

Everything I’ve heard is that they’ll be including a delrin sleeve with the v2 to get rid of that slip slop.

[Chuck E Ducky]

Good that will save us the trouble of figuring it out ourselves. That 3D printed option seems to work well. The picture Cuda just posted looks like it has some kind of an insert.

Delrin would have good wear properties if the tolerance is good.

[iamthelazerviking]

They also have a fatter barrel with their inserts

[Chuck E Ducky]

They say what the price will be for that

[superman]

Looks like they changed the end of the slide too.

[Chuck E Ducky]

They add a Delrin sleeve on the V2. They are posted now. Barrel kit is like $70 if you want it. I got one without it.

https://novapb.com/collections/phant...duck-version-2