Dye DFF-20 Lazarus Valve

[Murph]

My Lazarus valve is in! I had to mod the stock set screw on my trilogy so it would sit just recessed from the bottom face of the body - It took about 30 minutes with a file and a lot of patience because I didn't want to go too far and have no meat for the hex wrench to grab. I'm going to be trying with the stock hammer, SLPS Springs and a basic delrin bolt I got off of e-bay.

[Brokeass_baller]

Quote him, don't comment. He can't see comments.

[Impactfour]

Yup. I'm not a hopper guy, and never really vibed with the autococker platform but I kinda wanna see what kind of efficiency a trilly or sniper could get off a 12ie

[Trbo323]

Anyone have any efficiency numbers yet? Specifically around 12g.

Thinking of putting one in a empire sniper

Sent from my motorola edge 5G UW (2021) using Tapatalk

[zinger565]

Got mine in my trilly pump today. Slice pump kit and SLPS hammer spring. Just dry firing this thing is smooth, and such a crisp shot. Can't wait to field test.

[dkfactor]

I put a Lazarus valve in my empire resurrection and tested it out today. I am using an inception designs universal hammer with an unknown spring. With the IVG flush and the HPR set at 175 PSI I was able to main a very constant 285 FPS.

I had an Inception design high flow valve in it before, i had the IVG 2 turns in and the HPR set at 250 PSI to get to a constant 285 FPS.

The marker shoots very smooth and I am impressed with everything.

[Murph]

Guess I am throwing a new valve in my trilogy

[imped4now]

You may need to spec a "non-paintball" spring. I've spec'd one on McMaster Carr and can report back with the PN#.

[Slowzrally]

Yeah, its nice to be able to expand any blowback style platform past basic mods. I am excited to get it dialed in and see final numbers.

[Impactfour]

That's really cool to hear. I've always liked the kp3 platform. Having more options to modify it is nice.

[superman]

Now that you mention it. I think Angry paintball mentioned the same thing on another cocker. sounds like they should have included the screw.

[Shecki]

Actually, no....I was in fact referring to the set screw that holds the valve in place and not the red tube. I have touched base with Fabrice on this and he is going to pick up a Lazarus down at Cup and possibly machine some set screws that will work with the Lazarus. The red tube was a non-issue....gun aired up and fired just fine with the red tube in there as I figured it would. I just don't have any confidence in the lip of a cupped set screw to hold the valve in there with a hammer hitting it open repeatedly. From the looks of one of his IG posts...it looks like he's designed a new redtube as well that will help flow with the Lazarus also.

[Slowzrally]

Put mine into a KP3. Works pretty good. Waiting on a chrono to show up to tune it completely. Seemed to have useable velocity at about 150psi.

[Brokeass_baller]

I second SPLS springs.

[Kit]

I got some slps springs coming from @maggot.
I will report back when they show up.

What pressures are people reporting with the valve?
I should also get a new gauge for my tester. My gauge no longer starts at zero.